[email protected] – https://www.repairmywindowsanddoors.co.uk/hatfield-windowrepair/

How to Replace Door HandlesDoor handles are an essential part of the decor of your home. A new handle can bring your home’s decor up to date.Over time, your knobs on your doors may begin to feel stiff or even break. These are indicators that it’s time to change the knobs. This guide will help you select the appropriate replacement door handle for your home.Door KnobsDoor handles can enhance the appearance of your home while also making it easier for people to open and close doors. They come in a wide range of finishes, colors and types to match your decor. If yours have started to show signs of wear or requires an upgrade You can change them in just a few simple steps.The first thing you need to do is locate the shaft or spindle through the knob’s attachment to the door. Some knobs have a small opening that can be used with a screwdriver to remove the set screws that keep the handle in place. Some have a small slot or hole that you can use to press a spring-activated detent pin with a flathead. When you press the pin and the latch mechanism opens, it releases and lets you pull or push the knob.After you have gained access to the shaft or spindle, take off the door knob and replace it with the new one. Align it correctly and check that the latch is working properly before tightening the set screws.After replacing the knob, place the latch rod in position over the door’s hole and lock it in place with the rod mechanism on the second knob. Make sure that the holes are aligned then tighten the screws for the latch plate.Some people prefer a brushed or smooth metal finish for the door hardware to give their home a sleek and contemporary look. This will match their furniture. Some prefer a rustic look that works well with farmhouse-style rooms. If you have someone in your family with mobility issues, you may prefer a lever style or rim lock that requires less pressure to operate.Other factors are being looked at more and more when it comes to the design of door handles. Infection control and accessibility have been major considerations when it comes to developing new handle designs. For instance certain handles can be operated using a person’s arm.LatchThe latch that opens your door can wear out from age and use. The replacement of the latch to fit the new handle is a simple DIY job and it will make a significant difference in how your door opens and closes.Depending on the type of handle you are using, the latch could be a separate component or a component of the knob. In any case, you’ll follow the same steps for removing and replacing. The process of removing the old latch of place is fairly easy particularly if your door handle has what is known as a “magic button”. This tiny pressure-slot, found on the side knob, is what you will need to press in order to pull the latch out of the handle.If your handle does not have this button, the first step is to remove any cover plates that are positioned over the latch plate. They are typically rectangular or circular and can be removed by using a screwdriver to pry them off the handle. Some have a small slot inside that you can insert your screwdriver through, while others snap off.Next, you will want to loosen the two machine screws holding the latch and inner plate to the door handle. It is important to keep the screws that are shorter and have a pointed tip in a safe place so that you can reuse them in the future. After the screws have been removed, you can take the latch plate and mechanism from the hole, and then set it aside.Now you can start on the new latch. Install the latch plate into the door hole and secure it with the hardware provided. Make sure that the square pin in the interior of the latch faces the latching mechanism of the handle and is aligned with the other holes for screws in the handle. Then attach the latch’s exterior plate using the screws provided.Strike PlateOne of the most frequent reasons to replace the door handle is that it feels loose or doesn’t lock properly. This is usually caused by malfunctioning parts of the latching system, such as a strike plate that is too short or has moved upwards or down on the doorjamb over time. This simple fix allows you to replace your old strike plate with a new, longer one that will provide better security and keep your door closed.Apply a lipstick or another marking material on the latch bolt to determine if it’s the strike plate. Close the door and try to latch it. If the mark is lower than the strike plate’s hole, it means that the plate is too small and the door will not latch. If the mark is higher or below the strikeplate hole, the strikeplate is likely to have been moved up or downward on the doorjamb.You might be able to screw the new strikeplate into the one you have already installed using the screws included with it, based on the door you have. You may have to first drill holes and then chisel a bit of wood to ensure a secure fit. If this is the case, be careful not to cut too hard or you’ll damage the strength of your doorjamb.You can also try installing a new strike plate which gives the lock a much stronger grip on the door and requires more force to open it. It usually requires two larger screws to fix the strike plate in the door frame. upvc door handle ‘ll have remove the old strike plate before drilling and chiseling the wood to make space for the new one.This difficult-to-find strike plate was specifically designed to work with antique rim locks and it’s made from durable solid brass in a heavy duty thickness. It comes with both machine screws and wood screws, so you’ll have the correct equipment for your task. Keep in mind that wood screws have a pointed tip whereas machine screws are blunter.